3M Projector Lamp

The X76 3M projector lamp replacement comes with a genuine original Ushio 220 watt bulb inside.  This lamp is rated at 2,200 lumens (brightness equal to the original 3M lamp replacement).  The X76 lamp has a rated life of 2,000 hours (3,000 hours in Eco mode).  Beware of lower quality lamps with generic bulbs inside that have poor construction, reduced lumen output, and shorter rated life.  Instructions on replacing the lamp in the 3M X76: Turn off the unit and unplug the power cord Remove the lamp cover then remove the 2 screws that hold in the projector lamp Pull lamp out by the handle then insert the new lamp replacement Now tighten the 2 screws and install the lamp cover Plug unit back in and turn on the projector Lamp timer reset instructions for the X76 projector: Goto main MENU Select the ADVANCED MENU option and then press ENTER In the left column select the OPTION menu, ENTER Now, go down to the LAMP TIMER option and press ENTER When you see the dialogue area move up and select RESET Your lamp timer should now be set to zero